High Load Grease 1
HIGH LOAD GREASE 1 is a premium quality semi-synthetic lithium complex grease specifically designed for use in slow moving, heavily loaded plain and roller bearings. It’s high base oil viscosity (ISO VG 1500) means the grease is very tenacious and will resist movement in the bearing or housing due to vibration or water wash.
Cost Saving Benefits
• Exceptional load carrying ability substantially extends component life
• Being fully resistant to the wet, extends the life of the lubricant and protects against corrosion
• Good oxidation stability enables the grease to provide lasting lubrication at high temperatures
• A high degree of mechanical stability extends lubrication intervals
Method of Application
HIGH LOAD GREASE 1 can be applied by hand, or by using a standard grease gun (400gm cartridges available), or via a central lubricating system capable of pumping an NLGI No.1 grease.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over- lubricate and apply the quantity of grease recommended by the bearing manufacturer.
Typical Physical Characteristics
Appearance – Black, soft, smooth grease
NLGI classification – 1
Thickener – Lithium complex
Base oil – Mineral and synthetic hydrocarbon
Dropping point (ASTM D2265) – 250oC min.
Solid lubricants – Molybdenum disulphide and graphite
Solid lubricants content – 6.5% Dynamic corrosion resistance (EMCOR IP 220) – 0:0 Copper corrosion (IP 112) – Negative
Oil separation (IP 121) – 1%
Timken OK load (IP 326) – 25kgs
Water resistance (DIN51807) – Fully resistant
Shell Four Ball Weld load (IP 239) – 500kg
Operating temperature range – +10oC to +150oC (180oC intermittent)
The content of this data sheet is given in good faith but without warranty.